Our functionality search engine is already being prepared for the new MaxiEcu 3.0 software. For this reason, we introduced the latest updates (January / February 2023) in MaxiEcu 2.0 “quietly” without publishing a list of new diagnostics or changes in the search engine on our website. As a result, the list of available options in the search engine is smaller than it actually is, but the software has added new options. This month we are posting another update (the latest database will be with the date March 2023 visible in the upper left corner after starting the software). Below is a general list of the most important recent changes:
BMW
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional adaptations on selected systems
• Entering additional diagnostic identifiers (codes) into the database
• Support for additional systems on selected models
Chrysler
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional adaptations on selected systems
• Entering additional diagnostic identifiers (codes) into the database
• Support for additional systems on selected models
Dodge
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional adaptations on selected systems
• Entering additional diagnostic identifiers (codes) into the database
Support for additional systems on selected models
Daewoo
• Adding new fault codes to the database
• Support for selected drive units
Dacia
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional systems on selected models
• Entering additional diagnostic identifiers (codes) into the database
Ford
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional adaptations on selected systems
• Support for additional systems on selected models
Fiat Group
• Support for additional adaptations on selected systems
• Support for additional actuator tests on selected systems
• Entering additional diagnostic identifiers (codes) into the database
• Support for additional systems on selected models
• Support for additional encodings on selected systems
VAG Group
• Adding new fault codes to the database
• Improvement of the stability of the T.P protocol. 2.0
• Support for selected drive units
• Support for additional systems on selected models
• Support for additional adaptations on selected systems
Hyundai
• Support for Euro 6 diesel engines
• Optimization of adaptation performance
• Adding new fault codes to the database
• Support for additional systems on selected models
Jaguar
• Support for additional adaptations on selected systems
• Support for additional actuator tests on selected systems
• Entering additional diagnostic identifiers (codes) into the database
• Support for additional systems on selected models
Jeep
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional adaptations on selected systems
• Entering additional diagnostic identifiers (codes) into the database
• Support for additional systems on selected models
Kia
• Support for Euro 6 diesel engines
• Optimization of adaptation performance
• Adding new fault codes to the database
• Support for additional systems on selected models
Land Rover
• Support for additional adaptations on selected systems
• Support for additional actuator tests on selected systems
• Support for additional systems on selected models
• Entering additional diagnostic identifiers (codes) into the database
Lada
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional adaptations on selected systems
Mazda
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional adaptations on selected systems
• Support for additional systems on selected models
Mercedes
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional adaptations on selected systems
• Entering additional diagnostic identifiers (codes) into the database
• Support for additional systems on selected models
Mitsubishi
• Support for additional adaptations on selected systems
• Support for additional systems on selected models
• Support for selected drive units
Mini
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional adaptations on selected systems
• Entering additional diagnostic identifiers (codes) into the database
• Support for additional systems on selected models
Nissan
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional adaptations on selected systems
Opel
• Support for additional adaptations on selected systems
• Support for additional systems on selected models
• Support for selected drive units
• Support for additional encodings on selected systems
Peugeot
• Adding new fault codes to the database
• Support for selected drive units
• Support for additional adaptations on selected systems
• Entering additional diagnostic identifiers (codes) into the database
Porsche
• Support for selected drive units
• Support for additional adaptations on selected systems
Renault
• Support for additional adaptations on selected systems
• Support for selected drive units
• Entering additional diagnostic identifiers (codes) into the database
Saab
• Support for selected drive units
• Support for additional adaptations on selected systems
Suzuki
• Support for selected drive units
• Support for additional adaptations on selected systems
• Support for additional systems on selected models
Toyota
• Support for additional adaptations on selected systems
Volvo
• Addition of additional current parameters in diesel engines D4204T11/13, D4204T5
• Support for reading injector corrections for selected engines
General chenges
• Additional descriptions in inspection deletion procedures
From February 2023, our latest Expert interface is available for sale. “Ironman” among devices for professional use. Strong, aluminum construction will withstand workshop conditions. We have also added electronic components that allow for even greater range of Bluetooth and Wifi connection. For those who prefer a classic wireless connection – the set also includes a USB cable and a durable cable with a stabilizing mount for the OBD socket.
What else? Expert is adapted to work with 24V installations, so as soon as we add support in the software – no problem and no worries about failures, you will be able to connect the interface to the installations in trucks. Expert is also adapted to the remote addition of new protocols.
Information for Users of 4th generation interfaces (the so-called “Batmans”) – don’t worry, you don’t need to replace your interfaces. The 4th generation still remains a great option and, in our opinion, the most optimal variant for private use. Expert was created for professional use, in conditions that are not always conducive to keeping the equipment clean and not exposed to daily durability testing 🙂
However, if you have a 4th generation or even older MPM-COM interface and want to change to the Expert interface – please contact us via the application form in the User’s account – our Sales Department has also prepared an offer for this occasion.
Ps. For all those who have more than once forgotten to disconnect the interface from the socket – Expert also has a special sound signaling reminding you to leave the device plugged into the socket.
EDIT: from April 20, 2021 – we have introduced a new method of logging in to the User’s account. As LOGIN you need to enter the e-mail address that is assigned to the account and license (instead of the interface serial number)
Why did we decide to change?
☑ Convenience and safety
We’ve received reports that you don’t always remember your serial number. Besides, we know that it is easy to make a mistake by entering a sequence of characters in which each symbol has meaning (and sometimes it is easy to confuse the letter “O” with the number “0” 😊).
☑ Habit
Most websites currently offer logging in with an e-mail address and we know that most of you are used to this method.
☑ Additional benefits
Especially for Users who have several interfaces. Now, having several interfaces, you have to log in separately to the account assigned to a given device. After the change – after logging in, a list of your devices will be displayed.
It will also be more advantageous for Users who decide to replace the interface with a newer generation. After the exchange – the serial number of the interface changed, and therefore the login. If the login is an e-mail, even after removing the old interface – login will be unchanged.
The unified login method also gives you more opportunities to introduce further improvements that we are planning. So we hope that you will quickly find out about the advantages of an e-mail address as a login to the User’s account. We will inform you about the introduction of the change 😊
We present a completely new application – MAXI327 – for car diagnostics in the OBD standard. An application created by the MaxiEcu team – especially for people who want to have access to check basic parameters, fault codes or performance via mobile devices with the Android system. Specially designed, modern cockpits not only provide insight into the necessary data, but also provide the ability to export to a spreadsheet and share the results in a graphical form. Simple, convenient and without any license – the application is free and can be downloaded from the Google Play store.
Important: people who already have a User account on the MaxiEcu website, after downloading the application, should log in by entering the password to their account and the e-mail address assigned to their license.
Ps. The application will be constantly developed by us, we already have plans for further improvements, but any suggestions are most welcome 😊
When shopping through our online store –
you can be sure of a quick delivery 😊 Packages are sent for shipment even several times a day, so – all
orders placed during our Sales Department’s working hours is almost immediately
ready! However, please remember that the holiday season is an extremely busy
period for courier companies. The delivery (especially foreign shipments), may
therefore be extended. We kindly recommend not to postpone shopping until the
last minute.
What is the MaxiTools app for?
Thanks to the multiplexer built into the MaxiEcu (MPM-COM) interface, the program allows you to activate the operating mode exactly the same as the ELM 327. You can also choose to change to the VAG-KKL mode and the advanced K-Line mode. Correct modification of the settings in the advanced mode will make no need for any adapters. MaxiTools also has the MaxiEcu interface test function, with which you can check whether the multiplexer is working properly.
See our video on YouTube
Download links:
iOS: App Store
Android: Google Play
Windows: Konto Użytkownika
Note: The program is intended only for MaxiEcu interfaces (the MPM-COM version).
We are always glad to support our Users but we are not able to provide technical support for other software.
Many of our users ask us about the
possibility of purchasing a 4th generation interface.. so in response to all
e-mails, phone calls and other forms of messages – Especially for MaxiEcu Users
– we start a new interface exchange promotion!
When? From today (September 17th, 2020)
Where? Directly on the User’s Account.
As part of the promotion, you can choose:
Basic Exchange – basic promotional price – order processing – after the payment is credited.
Discounted Exchange – an additional discount for returning the previous generation interface – order processing – after we receive the package with the returned interface and after the payment is credited.
Regardless of the offer:
- you get the new 4th generation MaxiEcu interface
- you get a new 2-year warranty period
- you keep all the licenses (brands) that were previously assigned to your interface
After exchange:
- the serial number of the new interface will be your login to the User Account
- it will be necessary to download the MaxiEcu installation file again (details will be described in the e-mail with information about the change of data on your Account).
- the “old” interface will be removed from the account and the MaxiEcu database (it cannot be resold).
We provide courier shipments to most countries
in the world.
Purchase as part of the promotion is also
possible in our store in Gdynia, ul. Fleszarowej-Muskat 7 (open from Monday to
Friday, 7:00 am to 3:00 pm). .
The terms and conditions of the promotion
are available on the User’s Account.
We get signals from you that you like our
new interface (thank you very much for all the messages and comments). Both the
parameters and appearance are impressive, so we are not surprised that users of
previous generations of interfaces are considering replacing the good with an
even better model.
We are currently offering a promotional
interface exchange, but only for domestic shipping. If you live outside Poland
– contact us for information on the possibility and costs of shipping.
- Write to us at shop@maxiecu.com – enter the serial number of the old interface, the e-mail address assigned to the license and the data for shipping the new interface (country, address + phone number for the courier). In response, you will receive information on costs.
- If you are decided to buy – pay for the order.
- After the payment is booked – we will make the shipment. We will also remove the old interface from your User account, add the number of the new interface and generate a new license for you. Of course, all brands on your account will be kept. After all, you will receive an e-mail informing you that your account details have changed. So you will have to do a license update, which we have already described here: CLICK
In case of high interest – we may also consider a purchase options through the User’s account.
Over the last months, the MaxiEcu team has been working intensively on creating a diagnostic interface that would not only have better parameters than the 3rd generation interfaces, but would also enable further software development and access to new diagnostic possibilities. The aim was also to create a product that would be user-friendly in terms of ergonomics and, of course, visually. Collaboration with designers, a lot of brainstorming sessions, tests and debates resulted in the 4th generation interface, which is now officially available for sale.
Externally – it can not be confused with any other equipment available on the market. The design of the housing has even gained legal protection in several dozen countries.
But the interior of the interface is also impressive. We chose electronics that make the quality of operation unrivaled. In addition, we focused on wireless communication technology. The 4th generation has 2in1 options, i.e. Bluetooth and Wifi at the same time.
After a lot of effort, we can proudly say, “We’ve got it!”
We encourage you to read the technical details of the new interface.
4th generation interface with the selected brand (MODULE): store
4th generation interface with all brands (FULL): store
ATTENTION! THE LAST PIECES IN OUR ONLINE STORE
The number of available interfaces is limited. Our warehouses are almost empty, so there is a risk that we will not be able to fulfill your order 🙁
If you want to be sure that the goods are available – contact us: shop@maxiecu.com, tel. 0048 58 676 02 67 (The Sales Department works from Monday to Friday, 7:00 a.m. – 3:00 p.m.).
Soon we will start selling a new product 🙂
